Na netu sem našel nekaj, kar bi se dalo uporabiti za naše dirke, če bi bila cena primerna in kompatibilnost AMBrc.
BML-01 Decoder
Specifications
Dimensions 169 x 112 x 30 mm
6.6 x 4.4 x 1.2 inch
Humidity Max. 90% relative
Power supply 12V dc via external adapter
Weight 365 grams, 0.165 lb
Signal pick-up Magnetic induction
Track width Max. 10m / 33ft
Time resolution 0.001 seconds
Serial port To connect decoder to time management computer
Power led Communication information
- Indicates if signal connection is made
- Good or weak signal strength
- Master or slave function
Muli-loop Max. 4 loops (1 master decoder and 3 slave decoders)
Audible pass signal Via headphone front connector
Included accessories - Passive detection loop for tracks up to 10m / 33 ft.
- Coax cable ( 20 m / 65 ft molded plug)
- Adapter (EU or USA molded plug)
- Serial cable
- Manual
DPRC-20 Transponder
Specifications
Number of competitors Unlimited (>16,000,000)
Dimensions 31 x 20x 7mm
1.24" x 0.8" x 0.28"
Weight < 10gr (including powercable)
Fixing method Screws
Technology Fully digital
Signal transfer Magnetic induction
Temperature range -5 up to 55 degrees
Time resolution 0.003 seconds
Max speed 125 km/h
Power supply Externally by receiver
Voltage range 4,5 - 12 Volt
Power consumption < 6 mA
Transponder position Max 20cm / 0.6 ft
Colour Yellow
Little Pit timing and scoring software:
http://www.chronit.com/products/software_littlepit.html#
INFO: http://www.chronit.com/products/products_modelcarracing.html
CENA: ?