Napisal/-a JureHB » 24.10.2004, 17:03
Ne ne dela! Sem gledal v navodilih in pod Error messages najdu tole!
Error: disconnect battery 1/2 and/or Power-On Reset:
Cause: a) One or more batteries was connected to
the charger before it was connected to the car
battery.
b) The "watchdog" has tripped in mid-charge or
mid-discharge. It responds when the micro-processor
is in a state which the software does not
recognise, perhaps due to outside interference.
Note: Not an error! The charger is incapable of deciding
whether a lead-acid or Ni-Cd program has
to be selected, or whether a charge or discharge
program is to be used.
Error: The isl 6 does not respond to the buttons.
Note: Not an error! During the measurement phases
("!") and towards the end of the charge process the
programs must not be altered, as the isl 6 must be
allowed to detect the imminent "full" state (screen:
a, b, c ...) without outside interference.
Če pritisnem obe tipki na enkrat se mi pojavi tekst: Display update 5sec. in potem ene številke Autobat 11792,... in spet od začetka!