When using stock 12° front upper arms, the servo saver may touch the steering block when the wheels are turned. We suggest removing a small amount of material from the steering block as shown. This issue does not occur when using the optional 6° front upper arms
M18 Servo Saver Supplementary Sheet
Moderator: Scythe
1 prispevek
• Stran 1 od 1
M18 Servo Saver Supplementary Sheet
Napisal/-a JC Borcy » 26.09.2005, 23:32
When using the #382500 Micro Servo Saver with XRAY M18:
When using stock 12° front upper arms, the servo saver may touch the steering block when the wheels are turned. We suggest removing a small amount of material from the steering block as shown. This issue does not occur when using the optional 6° front upper arms
When using stock 12° front upper arms, the servo saver may touch the steering block when the wheels are turned. We suggest removing a small amount of material from the steering block as shown. This issue does not occur when using the optional 6° front upper arms
LP, Borut
-
JC Borcy - ____________________
- Prispevkov: 1201
- Pridružen: 10.07.2004, 04:08
- Kraj: Maribor
1 prispevek
• Stran 1 od 1
Kdo je na strani
Po forumu brska: 0 registriranih uporabnikov in 2 gostov